199
Sanding is complete on the head.
|
200
Lower sanding complete.
|
201
Working the outer head frame now.This is a multi part cabinet and head design.I know I want the least material and bu
|
202
Repairs are complete to the frame.
|
203
Frame is primed.
|
204
Frame is sanded and ready to paint.
|
205
Frame is based in black.
|
206
A very minor spot in the black will benefit from some detail work.Easy to cover and no real danger of building a line s
|
207
|
208
Lower is now ready for the final clear.
|
209
Head ready for the final clear.
|
210
Frame is in its final clear.This will insure that all three parts match in gloss level.
|
211
Head is final cleared.
|
212
Lower in final clear.still wet right now so the gloss and peel level will flatten out as it cures. .
|
213
|
214
|
215
Head is now dry and working towards it's final gloss level.
|
216
Lower is dry and taking it's final form.
|
217
A better idea of the gloss level.It is version of gloss but not glossy.Dialed up a touch from the previous version to bett
|
218
Couple days later and it is now unmasked and in the rebuild area.Finally!!
|
220
Rebuild begins.
|
221
|
222
|
223
|
224
|
225
Will drill the coin door frame bolt holes and ground braid now.
|
226
Holes are drilled from the coin door frame.
|
227
Braid is run.
|
228
|
229
All boards were serviced less the CPU which is an aftermarket version that is new.
|
230
Will rebuild the power supply first.The panel and fuse bracket were nickel plated to freshen them back up and give a
|
231
Heatsink compound is applied to the new bridge rectifiers.
|
232
Transformer is cleaned and refreshed.The panel is rebuilt.
|
233
Power supply in place.
|
234
Head is mounted to the lower now.
I have sourced and installed the correct hinges for the game.New channels, rails and na
|
235
Upgraded leg plates were used the speaker plate is being fit.The other metal shown was either nickel plated(glass recei
|
236
New flipper button switches will be built up.A capacitor is used to minimize arcing and crossfire this era of games are
|
237
Flipper button switches are wired with correct colors and tube protections.
|
238
Switched are placed as was the nickel plated prop rod.
|
239
|