42
Playfield is being prepped for the first clear.
|
43
Shooter lane is reworked.
|
44
|
45
|
46
Will prep for the third magnet install.
|
47
Drilling for the magnet core.
|
48
|
49
|
50
|
51
Finishing it out.
|
52
|
53
Wood tone is painted so it is just not a hole in the playfield but actually looks correct.This is done in the same patte
|
54
Will work the border in a bit.
|
55
First clear applied.
|
56
|
57
|
58
After this dries a couple days I will sand it down and start the more involved repaints and repairs.
|
59
Playfield has been sanded,repairs were made as needed and now all the wood tones are being lightly refreshed to eliminate
|
60
Insert borders are redone.
|
61
Some yellow work was needed.
|
62
Ready for the second clear application.
|
63
Second clear is applied.
|
64
|
65
|
66
|
67
|
68
Will let this set a few days then finish it up.
|
69
Mini is cleared for the first time.It will be further reworked.
|
70
Playfield has cured and is ready for the final rework and clear application.
|
71
Some final work to the added magnet border as it levels out.
|
72
Final clear is applied.
|
73
|
74
|
75
|
76
Added magnet now looks correct.I will let this set a few days then final sand and polish it prior to rebuild.
|
77
Working on the coils now.
|
78
Al coil assemblies are polished and rebuilt.
|
79
New ramp.
|
80
New ramp built with supplied mods.
|
81
Cabinet is being built.All mods are being installed in a clean/more permanent way.
|