202
|
203
New harness is made up and the assembly is complete.
|
204
The internal part have been nickel plated and are being built back up.
|
205
The flipper button board assemblies are cleaned and polished.One new board was supplied so another was sourced
|
206
The cabinet build and wiring is complete ad prepped for the soon to be installed playfield assembly.All cabinet based
|
207
Working through the last couple assemblies now.The gumball machine will be torn down cleaned and rebuilt.
|
208
|
209
The clock will also be torn down cleaned and rebuilt.
|
210
|
211
Gumball machine is cleaned and being rebuilt.
|
212
I have a certain color combination in mind for the gumballs on this particular project because of the way I want it
|
213
Gumball machine rebuilt and in place,
|
213a
Verifying that this is a combination that will work well with the backboard.I say yes.
|
214
Now on to the piano and clock,.
One of the things I hate the most about piano mods is the way they just loosely sh
|
215
New sockets are placed and well secured.They are a different style but will make the fit and function much more f
|
216
A new harness for the lighting is made and he diodes are moved downstream in the wiring to further clean things up
|
217
All clock gears are cleaned and well greased for a quieter operation.
|
218
The bracket is now mounted and this assembly can now be installed or removed easily just as if there were now pian
|
219
The clock is now properly shimmed and the proto style plate is used in the build to better match the translite.The
|
220
The existing rocket ship mod will need some work.The wires are too fragile and it has little to no style.
|
221
Rocket ship is reworked with a new set of sturdy wiring and a quick paint job that while not perfect looks much mo
|
222
Topside rebuild is closing out for the time being and I will focus on the underside.
|
223
Underside rebuild begins.
|
224
Switch harness in place and rebuilt.
|
225
Many new sockets are needed and some of the wiring will have to be redone entirely because of how fragile it is or
|
226
Lower GI wiring and sockets are reworked with better color correct wiring.
|
227
|
228
The driver for the third magnet is populated in both components and wiring.
|
229
Just about done with the underside wiring and it will all fall together in the next few hours from this point.
|
230
A new addition to the playfield harness is made.This will provide all mods that require either 5 or 12 volts of po
|
231
|
232
Harness is run throughout the entire playfield with taps in certain spots as well as dead ends that will provi
|
233
Multiple taps of 5 volt which is grey.Black is ground.
|
234
Power taps are tested.
|
235
Future tap of the two voltages 12(yellow)5(gray) and ground is weaved into the harness and capped with the male
|
236
A GI tap is also made and capped for future use if needed.
|
236a
This is all the extra wiring etc I was able to eliminate through that small harness addition I made.
|
237
Playfield is just about ready to go in the cabinet.A little testing outside will be done first.
|
238
The color changing door mod is sourced and in place.
|
239
Powered up for testing.
|