81
All ball guides are regrained.New wiring in protective tubing is installed with new switches on the parts that use the
|
82
Playfield is being built now.
|
83
Coin door is was torn down,cleaned,refinished in the correct factory style finish with gloss spatter and rebuilt.
|
84
New coin slot and eject plastics.
|
85
Cabinet is up on legs and being built.
|
86
Edges were finished in a correct color not just blacked out.
|
87
Polished chrome trim installed.
|
88
|
89
Boards were serviced.
|
90
|
91
Boards installed.Wiring is being run and repaired where needed..
|
93
Cabinet build continues with a focus shifting towards neatly wiring and implementing the upgrades.
|
94
Playfield is ready to start wiring.
|
95
All coil assemblies and metal have been cleaned polished and rebuilt.Much of the wiring has required rework and trouble
|
96
Working on the few remaining issues to sort out on this particular game that are out of the ordinary.The right flipper
|
97
On the other side of the bracket the full metal base covers the ball sensor.This would make the phantom flip featu
|
98
This is the sensor that should not be covered from the underside with the flipper plate.MB uses a unique flipper plate
|
99
A new flipper plate has been modified to properly fit monster Bash.This includes eliminating the mounting tab on the u
|
100
Two new flipper assemblies are built up from scratch.Not too mush worth using out of the old ones so why bother?
|
101
Flipper hurdle has been cleared and can be placed.
|
102
Flipper mech in place and fit correctly.
|
103
The playfield wiring continues to evolve.This has been a bit tougher than the normal MB because the wiring was hacked
|
104
|
105
The cabinet wiring is finished and has been neatly routed.Some added features were put in place for convenience .Ther
|
106
The underside rebuild and wiring are as complete as they get prior to install into the cabinet.
|
107
|
108
|
109
|
110
An exstensive amount of rewiring was done to the GI to clean it up/Mostly new sockets were also installed in the proces
|
111
Playfield is ready to place in the cabinet.
|
112
Playfield is in the cabinet now.
|
113
I will rebuild and upgrade the DMD panel.
|
114
|
115
Panel is torndown.
|
116
The clear window will be replaced and the right speaker upgraded to a larger version so that mount is also removed f
|
117
Panel has been cleaned.refinished and now rebuilt with upgraded speakers and a Color DMD.
|
118
Panel is ready to install.
|
119
Panel installed.The upscaling code is loaded to the color DMD and the game is powered up for testing.
|
120
Brite caps are installed for the jet bumper lighting and the new and improved scoop is highlighted.
|
121
All other parts are cleaned,polished,replaced etc etc and now in place.
|