73
The wear around the ringmaster,volt roll over,boom ballon and join the circus inserts has been roughed in.That means doing t
|
74
The fine details will be addressed later.
|
75
This one was pretty tough.The color match that is.Not a typical color to be reworked in terms of wear but ....when people r
|
76
The wood border has been roughed in but there are still some deep gouges around he ringmaster cut out.Those will be just kin
|
77
The second coat of clear is applied.I normally limit it to that but with this playfield there will need to be one more sess
|
78
Clear is cured and ready to sand and do the final rework.
|
79
The purple is kind of thin and transparent.I have noticed this on many of the sample playfields i have seen.With the smal
|
80
Some odd ground in swirling in the purple near the boom balloon.
The purple will need to be refinished /refreshed to get
|
81
Sanded and ready for repaints.
|
81a
Despite my best efforts I just couldn't get the shooter lane as clean as I would like it to be without over sanding and tre
|
82
Wood tone applied.It does not cover the natural grain.
|
83
Shooter lane refresh complete.There is still some definition that can be seen in the lane but the ground in dirt and routin
|
84
After much cutting the purple areas are ready to spray.
The lower and center are addressed here.
|
85
The upper area that was gouged out around the ringmaster is also being taken care of as it is the same color.
|
86
A light overly thin coat of purle is applied.It is still fresh in the pics thus a little "louder" but will grey o
|
87
I am catching the final border reworks and disguising the off registration still left in this and some of the following p
|
88
Some overlap others so they have to be done one side of the insert at a time.
|
89
|
90
At this point it is ready for what will be the final clear.
|
91
Final clear has been applied.
|
92
Shooter lane is much improved.
|
93
Reworks turned out better than I had hoped.
|
94
No more ground in dirt/swirling.
|
95
|
96
|
97
Ready for polishing then on to reassembly.
|
98
Since the cabinet needed repair on the inner lip underside I am going to paint it black instead of leaving it as is with
|
99
Refinished inner lip.
|
100
Unmasked and sanded clean.
|
101
New chocks installed withthe correct glides.
|
102
Decals installed.Edges will be finished out next.Already done on the sides of the lower but still waiting on the head and f
|
103
|
104
All parts have nbeen cleaned,tumbled.plated,polished rebuilt etc.
|
105
Decal edges are finished out.
|
106
Corners are seamless and match the cabinet.
|
107
|
108
|
109
Rebuild is in process.
|
110
|
111
|