120
New sling parts will be used.
|
121
|
122
Flippers will be rebuilt again and done so using the proper coil values.
|
123
Flippers rebuilt.
|
124
Trash from the process thus far.
|
125
Sling switched are being cleaned and polished.Done on the left not done on the right obviously.
|
126
New wires are run between sling switches.Much more durable.
|
127
Looms have been polished and sealed.New screws will be used for the plastic portion.
|
128
Rebuilding/reworking some of the wiring.
|
129
New clear tubing is placed on the trough switch diodes and the daisy chains are reworked.
|
130
Polished brackets are being swapped in place of the corroded ones.The assemblies are rebuilt once a gain and relabe
|
131
|
132
Underside is just about done.
|
133
Underside rebuild complete.
|
134
|
135
|
136
|
137
Playfield is in the cabinet and powered up for testing.
|
138
|
139
|
140
New boulders.
|
141
Old ramp flaps are being removed and the ramps are being rebuilt one at a time.Most are new and the one or two that are
|
142
First ramp rebuilt and in place.
|
143
Stepping the mine popper coil down a notch so it will have a softer eject which should deliver reliably to the righ
|
144
Most plastics and boulders are in place.
|
145
|
146
Time for the upper playfield.
|
147
Rebuilding eh bigfoot mech.Mostly rewiring it and reconfiguring a few things so it will be very durable.
|
148
Thicker wiring with short protections.
|
149
Bigfoot is in place.
|
150
New lamp sockets for the upper because it needs a new GI harness and reusing the old sockets is more trouble than it is
|
151
The old GI harness is smashed and fragile.The way it was routed at the factory just doesn't give enough wire to ea
|
152
New harness is made for the GI with thicker wiring and routed in another way that can keep it away from the mount
|
153
The upper flipper is also rebuilt and rewired with better/extended wiring.Game requires an old style plunger/spring
|
154
New plugs are made and the GI plug is keyed in a way to where it cannot be plugged into the flipper plug by accident
|
155
New harness for the upper complete and it is about ready to place in the game.
|
156
Upper is placed.
|
157
|
158
New large ramp.
|
159
Will be built with a stainless flap.
|