41
Digging into the cabinet a little more.Need to gut it so I can have a new one built to spec.
|
42
Discovered that the transformer is not the correct one.This one is too large.
|
43
The mounting holes do not line up.
|
44
|
45
Not sue what the wires go/went to but regardless we will need to find the correct transformer as I have no interest in
|
46
Cabinet gutted .
|
47
Head gutted.While the cabinet is being built I will start working through other aspects.High on the priority list righ
|
48
New head is built.
|
49
New lower is built.
Will prep and prime these next.
|
50
New head is prepped and ready to prime.
|
51
Head is primed.
|
52
Lower prepped and ready to prime.
|
53
Lower primed.
|
54
Lower sanded and ready to paint.
|
55
Lower based in blue.I am going with a little more vivid shade of blue on this one to best match the apron colors as well
|
56
|
57
|
58
Head is cleared.
|
59
Lower cleared.I will let this set a few days and then revisit it .
|
60
Cabinet is sanded and lightly based in the ground color once again.
|
61
|
62
|
63
First stencil color applied to the head.These colors will be a bit more vivid than he factory colors used but on the same
|
64
First color of the lower stencil is done.
|
65
All alignments are checked and slight corrections are made where needed to insure he corners come together perfectly.
|
66
|
67
Second color is done on the lower.
|
68
Using the factory apron as my guide I can see I am about as good as I could have hoped for in terms of color choice.Sli
|
69
Head is ready to clear.
|
70
Head cleared.
|
71
Lower cleared .
|
72
Will let this set a couple days then I will start reworking the surface and sharp edges.
|
73
Cabinet is sanded level and the final reworks will be done to the paint prior to the final clear application.
|
74
In this step I will eliminate the alignment boxes since they will not be needed.There are some repaints to do but I can do
|
75
The only large need this time around besides eliminating the alignment boxes will be eliminating the hard edge under the
|
76
Head will go through the same process and only needs a couple minor corrections.
|
77
Cleaned and ready to repaint where needed.
|
78
|
79
Minor rework on the head.Just tightening up a couple spots.
|
80
Lower requires a bit more work.
|