41
All panel parts are cleaned polished and it is now rebuilt.
|
42
Cabinet gutted.Will be replaced.
|
43
Head gutted will also be replaced.
|
44
Replacement playfield is being prepped.Corrections have been made where needed to the shooter lane(it was too short) and
|
45
I do not care for the variance of wood tones in the lane on these so I will blend it into a more traditional Bally
|
46
Shooter lane is addressed.
|
47
Even though the playfield is new there are some insert borders to rework from the leveling process.
|
48
|
49
|
50
Corrections are made where needed to the borders.
|
51
Playfield is cleared.
|
52
Shooter lane is more normal looking now for the title.You can still see the layer graduations which is ideal but
|
53
Inserts are level and the borders are solid.
|
54
|
55
Playfield is all set.Will sand and polish next.
|
56
New cabinet is prepped.
|
57
New head.
|
58
Cabinet is refinished.
|
59
Prepped and ready to decal.
|
60
Cabinet is decaled.
|
61
|
62
Braided.
|
63
New ramps are being built with stainless flaps,painted ships and green domes along with a green LED UFO kit.
|
64
|
65
New coin door installed.
|
66
Shaker motor in place.
|
67
Polished chrome trim.
|
68
|
69
Cabinet protection in place at the leg locations.
|
70
Polished chrome legs and bolts.
|
71
Cabinet is ready to wire.All boards were serviced prior to installing them.
|
72
Playfield has been sanded polished and is being built.
|
73
Lighting for the post is being implemented .
|
74
Topside build is about to its limit prior to wiring.
|
75
|
76
|
77
|
78
|
79
Harness is made for post lighting.
|
80
All GI will be rewired to better wiring configurations and clean sockets.
|