1
TAFG as it arrived.First order of business on this one is to gut it and duplicate the lower cabinet.TFG uses a specific cabin
|
2
Opened up.
|
3
Game already has some enhancements like a gold door.
|
4
Trim is worn through and will be replaced.
|
5
|
6
|
7
Playfield is ok at a glance but there is some ugliness about it that would be hard to overcome.The ugliest part is the shoote
|
8
Inside the head is just average nothing terrible nor great.
|
9
The head is broken at the joint and both hinges are bent.This one being the worst of the two.
|
10
Already has the color dmd installed.
|
11
Boards look good will need to be cleaned and service.
|
12
First the lower is gutted so it can be duplicated.The power box style ,transformer panel ,chocking and extra buy in button
|
13
|
14
New head built.
|
15
New lower built.
|
16
Lower refinished.
|
17
Head refinished.
|
18
Head screened.
|
19
Prepped for art application.
|
20
NOS TAFG playfield besidethe used one.
|
21
Checking bar codes to verify.
|
22
|
23
Used playfield shooter lane has very little potential sice it is so rough in the actual wood not from a wear perspec
|
24
NOS playfields lane is a big improvement.This playfield was previously cleared but unfortunately they did not drill no
|
25
The playfield is signed by the designer.That was after the clear so it is easily rubbed off.I will clear over it after
|
26
|
27
Date stamp on the replacement is one day after the playfield it is replacing so we know everything is correct for TAFG.
|
28
There are a tone of holes and dimples to be made.
|
29
Focusing on just the jet bumper area to highlight exactly how much is missing in terms of holes right now.
|
30
The used playfield is the hole example.Big difference but always to be expected on these types of swaps.
|
31
Underside is also blank and lacks any dimpling.
|
32
Example of an area to be dimpled.
|
33
This same area now dimpled.Predrilled is rally more correct.
|
34
|
35
The drilling and dimpling is done.
|
36
Playfield is now ready to prep for a final clear.This will seal the drilling and dimpling as well as lock in the si
|
37
Prepping is complete and the signature is avoided as much as possible.
|
38
The playfield is now cleared.
|
39
|
40
|