1
This CC is decent but typical in terms of the decal wrinkling.
|
2
|
3
Playfield is okay.
|
4
|
5
|
6
The shooter lane is pretty beat.May sand out but it is doubtful.Might require a light repaint.
|
7
The skill shot ramp is poorly repaired but luckily they recently canme out with this much needed part.
|
8
Underneath is okay.Some poorly done repairs to the harness during a flipper rebuild but nothing that can't be overcome.
|
9
|
10
Inside the cabinet is average.Sheet is missing but that is no problem.
|
11
Just dirty in the back of the cabinet.
|
12
No hacks on the boards just dirt.
|
13
Underside teardown in progress.
|
14
Topside teardown in progress.
|
15
Under the protector is some mine hole wear.Not bad but it is into the green so it will need the woodtone,black border and en
|
16
The wrong wafers were used during the previous jet bumper rebuild.Red is an odd choice.Teal is original,black would be
|
17
All the wiring has been removed from the underside.
|
18
Playfield is out of the cabinet.
|
19
Playfield is nearly stripped complete just need to pop the T nuts out.
|
20
Cabinet is torn down and ready to begin stripping.
|
21
Old decals are being removed first with the heat gun.
|
22
Cabinet is back down to bare wood and ready to begin the repair process.
|
23
Repairs in progress.
|
24
|
25
Eliminating the hasp holes.
|
26
The chocks will be replacedd.
|
27
Repairs are complete cabinet is ready for it's first coat of spray on filler.Spray on filler is much thicker than primer a
|
28
New chocks installed.
|
29
|
30
|
31
Spray on filler applied.
|
32
|
33
|
34
|
35
|
36
The back of the head will be completely redone including rescreening the text on there now that we can do that in house.
|
37
The head has been refinished.
|
38
The lower has also been refinished and will be ready to decals after it is gorund braided.
|
39
|
40
|