41
|
42
|
43
|
44
|
45
Ready to clear the first time.
|
46
First clear applied.
|
47
|
48
|
49
Sanded and ready for the final clear.
|
50
Final clear applied.
|
51
Playfield has cured and is now final sanded and polished.
|
52
|
53
|
54
|
55
The rat hole area was rough/hand cut so I did not do anything there as it is a proto feature and would lead to making a m
|
56
|
57
Playfield is ready to rebuild.
|
58
Cabinet is prepped and the faded lettering is repainted.Very time consuming to mask off.
|
59
|
60
Lower is lightly cleared to seal the repaint.
|
61
Chocks will be removed and the back will be reworked a bit but not overly done so it will mesh with the rest of the fac
|
62
Cabinet is sanded,the top and back are primed to further smooth the rough grainy wood.
|
63
Interioir is reworked as well.
At this point it will be cleared once more then I will know it is well sealed and protec
|
64
|
65
Face of the head is reworked.The sides are too fragile to tape on without losing art so I will clear this as well before
|
66
Cleared once more.
|
67
|
68
|
69
Sanded once again.Ready to prep for the final black base and clear.
|
70
The goal at this stage is to get it as smooth as possible and eliminate the various edges and surface variations.
|
71
Where there was the typical leg wrinkle it is now sanded smooth and level from the process I will doctor these areas up befo
|
72
The previously faded side is now leveled out.
|
73
More wrinkle work.
|
74
|
75
Head is going through the same process.
|
76
|
77
I coud have easily stripped painted and screened the back of the head but my goal with most prototypes is to keep as much o
|
78
The head will need much black rework.
|
79
Lower fully prepped and cleaned ready to mask.
|
80
Lower masked for black base.
|