1
Terminator 2 base game.
|
2
|
3
|
5
|
6
.
|
7
Translite is dirty.
|
8
|
9
Boards look okay will need some servicing and wiring rework at the GI locations
|
10
Playfield is average.Not trashed but tereis cracking in the shooter lane eject and the inserts are extremely raised in s
|
11
Starting here .I have bought a used and previously reworked playfield.Not crazy about this option but the price was fair
|
12
The main issue with this playfield as received is that the shooter lane is painted poorly.Now I definetly understand there
|
13
A little better shot of how this repaint does not flow into the rest of the playfield.It just looks bad.
|
14
Another minor issue is that target cut out could use a little refreshing but that is quite minor.
|
15
I am in the process of digging out the original shooter lane and will try to figure out why it was done the way it was.
|
16
as I sand I find it has some type of filler in there.Why?I have no idea.
|
17
After a good bt of time working through this lane I am finally back to natural.Granted natural on this cut of wood isn't per
|
18
|
19
|
20
One more issue is that the clear is way too thick and even worse the T nuts were buried under it.T nuts should never be
|
21
T nuts are pulled.The amount of clear on them tells just how thick this was applied.That is not a plus it is a minus and I
|
22
Took quite a bit of sanding but the playfield is shaved down.
|
23
An overly thin wood tone is mixed to match the natural color as well as possible.
|
24
The wood tone concerns are masked and lightly refinished in a complete section no hardline.
|
25
The natural grain shows through but is also muted to disguise the cored look a bit.
|
26
|
27
Target bank is done as well.
|
28
Playfield is now cleared.
|
29
|
30
Shooter lane much imporved as is the entire surface.
|
31
|
32
|
34
|
35
|
36
|
37
|
38
Now that this is out of the way I can better focus on the rest of the project.
|
39
Playfield is sanded and polished.
|
40
|
41
|
42
|