1
Starting here to document the cabinet best.The floor is wrecked.
|
2
A peice of wood is glued to the bottom.
|
3
Coin door is buckled.
|
4
Head and lower are two different shades of yellow.
|
5
|
6
|
7
|
8
|
9
Better shot of the shade difference between the upper and lower.
|
10
|
11
Translite has some foil attached to it where the drivers mirror is.
|
12
|
13
Boards look average some hacks in the interconnect GI Wiring.
|
14
Head is being gutted.
|
15
|
16
Speaker panel is being rebuilt,
|
17
New speakers to replace the dry rotted original.
|
18
New display panel to replace the scratched original.
|
19
Apron has some sticker residue.I think I can salvage the art and rework it.
|
20
Glue was removed without damaging the art.
|
21
There will be some repairs and repaints needed later in the process and I will clear it as well.
|
22
|
23
|
24
Playfield is pulled out as an assembly since it does not slide forward only tilts .
|
25
Cabinet is trashed inside .The bell is missing the sticking arm.
|
26
The bell is well worn .
|
27
New bell is polished and the correct arm is in place.
|
28
|
29
The other metal is in poor condition but not terrible.Standard nickel plating should take care of that.
|
30
Power box is plated and rebuilt.I will install a new cord at time of reassembly.
|
31
Cabinet is gutted.
|
32
|
33
Tore the plywood off so the cabinet can be properly duplicated.Obvious why it was there to start with.
|
34
Head gutted.
|
35
Coin door will be dealt with now.It is buckled so there is no real fix besides replacement .System 11 doors are impossible t
|
36
NOS skin that utilizes the same slot and return configuration but is stamped slightly different between the insert and re
|
37
The originalframeis needed indwell be reworked,
|
38
The other parts are harvested.They will be cleaned polished and rebuilt.
|
39
The door is refinished as an assembly so the correct look and spray pattern match up well.
|
40
Door is assembled with new coin slot plastics.The W logo is highlighted in red to match the backbone and speaker panel gri
|