39
Dry and ready to rebuild.
|
40
Rebuilt.New staple down sockets are placed and new color correct wire in place of the bare wire originally used.
|
41
|
42
Lamp panel is ready to install.
|
43
Boards will be cleaned and serviced as needed.
|
44
Bookcase will be cleaned and rebuilt.
|
45
New extended wiring is placed for the motor and switches.
|
46
|
47
|
48
Tearing down the playfield.
|
49
I will place factory color correct wiring and plugs on each coil assembly to make the rebuild and future service needs muc
|
50
New wiring at the coil example.
|
51
Solenoid harness is being removed.
|
52
Solenoid harness is off and will be cleaned and gone over.
|
53
Wiring is being cleaned.
|
54
Coil assemblies are being rebuilt .
|
55
|
56
Flippers rebuilt.
|
57
Now removing the lamp harness using a similar process in that I will simplify it and rid it of any generic type wiring in
|
58
An example on the lamp harness is this.
These lamp sockets all share the yellow with blue stripe wire but they simply ju
|
59
I have now jumped these wires together with the factory correct yellow with blue stripe wire and done so with a better le
|
60
The same process will be carried out throughout the lamp harness on all feature lamps as well as the GI.
|
61
|
62
|
63
The GI will be reworked entirely so at the teardown phase I find it easiest to simply desolder them and then I can really
|
64
Generics are removed.Sockets are freed
|
65
Lamp harness is off.
|
66
Moving to the switch harness I will be doing the same thing I did with the solenoids in that I will put larger baks on p
|
67
An example here is this group of four targets.while there are four targets it is really just considered one switch in the
|
68
The bank is reworked with all targets now individually wired with that proper wire combination of Green/Yellow,White/Yell
|
69
Same process as I work through target banks.
|
70
|
71
Treating the jet bumper switches much like the GI lamp sockets in that I will free them from the harness and clean themind
|
72
|
73
All wiring is now removed.
|
74
these are all the generic wires removed during the process.This is not something you find on other restorations unless the
|
75
The wireform has been cleaned and polished then rebuilt with all new wiring that is neatly done.
|
76
|
77
the ramp is my next project.Like the other aspects I prefer my own wiring and I like it to be longer than the factory har
|
78
|