1
Game is a decent starting platform.Prety dirty,some wear around the flipper buttons etc.
|
2
The williams text is on there but was screened over with the blue.
|
3
|
4
|
5
Shooter lane is a little rough but will sand up clean I am sure.
|
6
Blue highlights around the castles.I like this look better not sure why they changed it.There is some ground in dirt on the
|
7
|
8
Teardown begins.
|
9
|
10
Some wear under the lockbar.
|
11
Auto fire bracket is welded together.I think this is just a cheap repair not part of the proto build up.The reason is becau
|
12
Some of the typically black brackets and assemblies are stainless on this game including the merlin eject.I can aslo see t
|
13
Not sure if this was originally a Scared Stiff head or not.The reason I note that is because the clip used to hold the ribb
|
14
All wiring is removed from the head.
|
15
|
16
|
17
Underside teardown nearly complete.
|
18
Topside teardown in process.
|
19
Playfield is out of the cabinet
|
20
Wiring is removed from cabinet.
|
21
|
22
Playfield is ready for final teardown.
|
23
Playfield is stripped bare topside.
|
24
Playfield is bare bottom side.
|
25
Merlin hole is a rough cut.
|
26
Shooter lane was pretty beat but sanded up nicely.
|
27
Playfield is cleaned and degreased.
|
28
Merlin hole isn't too bad does have some chipping and internal wear.
|
29
No Mylar was on the playfield anywhere so it has some issues in the jet bumper area.Will need to be refinished in that secti
|
30
Minor kickout wear.
|
31
No full wooden borders under the troll flaps.The red is chipping away there.
|
32
Back to the cabinet for now.There is wear around the flipper buttons and other spots here and there.
|
33
Head removed.The siderails are dinged so they will need to come off.I expect to see some art loss from the removal.Can't be
|
34
Siderails removed The art loss underneath was not bad at all because it will be easily covered by the new siderails and th
|
35
The trim out needs to be redone because so it is stripped down to the bare wood.
|
36
I try to save the patent pending text.
|
37
The previous flipper button area wear left side.
|
38
Minor on the right but still there so it will need work.
|
39
Filled in and feathered out.
|
40
The wear at the front from the lockbar digging in has also been addressed.
|