41
After sanding the front it will need at least one more entire skim coat.
|
42
This mixture is 25/75 with the larger portion being the glaze this time around.Hopefully this will do it but if not the las
|
43
Right side will need some more work at the leg mounts as well.
|
44
More filler applied right side.
|
45
Rear is okay will need just a little more at the legs.
|
46
Rear filler applied.
|
47
Left side .
|
48
Left side filled for the second time.
|
49
Front is guide coated after a light machine sand.It will be block sanded next to insure it is straight.
|
50
Final sand is done on the front and it is done in terms of structural repair.
|
51
Back still needs just a little more work.
|
52
|
53
Back is complete.
|
54
Lower is ready to begin the priming and smoothing process.
|
55
|
56 Cabinet is ready to begin the refinishing process.
|
57
A light ground coat of black is applied just to give the cabinet a foundation prior to the clear.
|
58
|
59
|
60
A coat of clear is applied.Right now I will just use regular clear with a high gloss.The purpose is to seal the cabinet up
|
61
Front is just roughed in there is quite a ways to go but the foundation is there now.
|
62
|
63
Cabinet is ready to sand again.
|
64
Sanded.
|
65
The grain is still very heavy.I can't sand much more without breaking through.My goal is to preserve as much of the origina
|
66
A glazing putty is applied to help fill in the deeper grain that would normally take several applications of clear and muc
|
67
The left side is going through the same process.
|
68
Grain is much heavier in the lettering on the left.That will be addressed later for now the goal is to get it as smooth as
|
69
|
70
Putty is sanded.
|
71
|
72
Cabinet is ready for another coat of clear.
|
73
Clear applied.
|
74
|
75
|
76
The grain is almost gone.After this coat dries it will be sanded.At that point I should be able to paint the black again an
|
77
Cabinet is ready to sand again.I have worked the rougher areas with a coarse grit prior to doing the complete sand.
|
78
|
79
Cabinet is sanded.
|
80
Wiped down.At this point the grain is pretty much gone so I can begin to do the final repaint.
|