1
True proto BR.Has an XR7 upper and lower playfield.
|
2
Cabinet is a bit rough.Delaminating,flaking etc.
This cabinet will be completely repainted with the use of stencils.
|
3
|
4
Ready to begin teardown.
|
5
|
6
|
7
|
8
Rare XR7 playfield.
|
9
First step will be to get the playfields out since I anticipate the cabinet will be the worst of the project in the grand sc
|
10
Upper playfield is out of the cabinet.
|
11
|
12
The lower will need some teardown prior to removal so none of the plastics and ramps get damaged.
|
13
Lower teardown in process.
|
14
Just removing enough to get it out of the cabinet safely.
|
15
The expected GI hacks are present.
|
16
Lower is out of the cabinet.
|
17
Pretty nasty inside the cabinet.
|
18
Cabinet teardown continues.The boards are removed.
|
19
Head has been gutted and is off the lower.That is a pretty big job on this game.
|
20
Teardown of the lower continues.
|
21
Dismantling this game takes a very large portion of the room.From a size and complexity standpoint it is like doing 2 games
|
22
Teardown of the cabinet is complete enough to move it out of the front.
|
23
|
24
The front is a wreck the rest is so so but has more of a graining issue than a delaminating problem like the front.
|
25
The siderails need to come of next.I will likely replace them but have to make sure they are the same as the standard syste
|
26
Siderails came off nicely so if I am not able to replace them I will be able to regrain them (not preferred though).
|
27
At this point I am going clean it up and see what I have to work with.I am on the fence about restenciling the entire gam
|
28
Ready to catch the head up with the lower.
|
29
Unfortunately there is some terrible touch on the upper head both sides.It is so thick and of unknown paint quality so it w
|
30
Mostly wiped off.Takes the original with it but it isn't a big loss.
|
31
More of a problem on the other side.
|
32
The front had to be stripped entirely.
|
33
The deeper issues have been addresses in the front.Things like drill holes and delamination or roughed in.
I let these re
|
34
The entire front will need a few complete skim coats.
The first one is done with a 50/50 mix of carbon fiber filler and g
|
35
All four corners are blown out at the legs and delaminating so the same repairs will be done as done in the front.
|
36
Filler applied right side.
|
37
The rear is just like the front in terms of delamination.
|
38
Rear is skim coated.
|
39
Left side prepped.
|
40
Left side filled.
|