41
Lower cleared.
|
42
|
43
|
44
After a day or two cure I will begin the leveling and stencil correction phase.Final clear will be matte but regular glo
|
45
Sanding in process.Leveling and stencil corrections are the focus right now.
|
46
Cleaned and ready for reworking.
|
47
The stencils are pretty good on this title so there are just a couple of minor break throughs to take care of in the silve
|
48
Silver is now in good shape on the lower.
|
49
Red needs a little work to get a nice even border all the way around.That has been taken care of on both sides.
|
50
Head is sanded for corrections.
|
51
Cleaned and ready to rework.
|
52
The red on the wheel is the main issue on the head.Both sides are being corrected.
|
53
The black has several break throughs and a couple corrections from leveling.That is taken care of here.
|
54
Cleared one more time with full gloss clear.
|
55
Lower cleared one more time in full gloss.
|
56
Much straighter and more level than the first pass.
|
57
In great shape at this point.After an overnight cure it should be ready for a final sanding and matte clear application.
|
58
Sanded and prepped for final tweaks and matte clear.
|
59
Final corrections are being made.
|
60
|
61
|
62
Ready to clear.
|
63
Lower matte cleared.Glossy now but will flatten out as it cures overnight.
|
64
Head matte clear.Gloss will die down as it cures.
|
65
After the overnight cure the matte clear is now at the desired gloss level.
|
66
|
67
|
68
Cabinet is in a spot now where it can set up while I work the rest of the game towards complete restoration.
|
69
I am going to restore most the major components as I remove them one at a time.It will be tedious to do it this way but wit
|
70
The first thing I am going to do is get some of the bulk off the playfield starting with the drop target banks.
|
71
the center bank has been removed.
|
72
The targets are incorrect and beat.The metal is tarnished and corroded.
|
73
I cut the wires because I plan on putting these banks on a hidden plug.I like to do this to make them more serviceable in
|
74
Torn down some parts have already been cleaned and polished.
|
75
All new correct targets.
|
76
Stand ups replaced switch plate cleaned up nicely.
|
77
Assembly is complete less a little wring and plug.I will do that later during the rebuild.
|
78
That closes out center target bank.
|
79
Next target bank.This one is a little more complicated since they have the knock down coils as part of the assembly as wel
|
80
Torn down.
|