1 Pretty nice game to work off of.
2
3
4
5
6 Minor wear at the saucer hole.
7 No wear at the kickout.
8 Shooter lane is nice little ground in dirt.
9 Dirty inside but unmolested.Free of hacks etc.
10 Tearing down.
11
12
13
14 Ready to begin prepping the parts.
15 Cabinet restore underway.
16 Stripping down to bare wood.Very few nicks or dents.
17 Back down to wood.
18 Primed and guide coated.
19 Sanded and painted.
20 Ground braided and decaled.
21 Lower decaled.Front needs finishing out.
22
23 Initial clear on playfield.
24 Initial clear sanded and prepped for final touch ups and clear.
25 Final touch ups done ready for final clear.
26 Final clear applied.Still wet in the next couple pics .
27
28 After a couple dayscure it will be ready to polish and assemble :-)
29 Cabinet is reasy to rebuild.
30 Rebuild is complete on the cabinet structure.Wiring is next.
31 Plated parts installed on the cab less the lock bar.An effort was made on the corners to keep the art solid/connected inste
32 This is an older run Pin pro speaker but it is new/never used.
33 Power box chromed.
34 Playfield rebuild in process.
35
36 Through parts installed.
37 Ready to start the underside.Updated trough installed.
38
39 All switches are being replaced.The WPC-95 stuff just has the most unreliable switches so there is no point in finding out l
40 Reinforced targets installed in the impact areas.