1
Starting out with a pretty decent game.I have not done one of these yet so I may be unaware right now of issues to look for
|
2
|
3
|
4
In the more obvious category there is wear around the flipper buttons on both sides.
|
5
There were black decals around them to start with.Those have been removed but right now the glue remains.
|
6
There have been some poor touch ups done to one side of the head.
|
7
On the front there are some issues.Nothing major but worth note are the black overspray and the dug in bolt.The typical chi
|
8
There is glass wedged between the clear dmd windaow and the plstic housing.
|
9
There are many fine chips and scratched on the tranlite.My best assumption is that the backglass was broken out of the game a
|
10
Opening the game up reveals that it is pretty dirty in general.
|
11
|
12
Knocker is disconnected.Not sure if that is to mask a problem on the board or just by accident.
|
13
|
14
Nothing glaringly wrong here just dirty and a bit well worn mechanically.
|
15
|
16
|
17
|
18
|
19
Prop rod is just laying in the cabinet.The slide on the right side of the playfield is bent as well as the corresponding pa
|
20
Game has some broken plastics and wear at the various holes.
|
21
I will be using an NOS playfield for the restore.
|
22
The NOS playfield looks to be in great shape.There are some large Mlar sections to remove though.This pic shows them in fr
|
23
A very large Mylar section in the upper playfield location.
|
24
Mylar removal in process.
|
25
All Mylar has been removed as well as the glue and residue the playfield has been further prepped for clearcoat.
|
26
Clear applied.This will be all the clear needed more than likely.After it sets a week or more I will sand and polish it.
|
27
|
28
|
29
|
30
Playfield was pulled out of the cabinet as a complete assembly.It is in the process of teardown.
|
31
Final parts are removed from the topside.
|
33
Underside is nearly stripped complete.
|
34
New and old playfield side by side ready to prep.
|
35
Old playfield is a little bit beat.
|
36
New playfield has few holes.It will need to be drilled and even dimpled in some locations.
|
37
|
38
It has some dimples in locations where the holes should be but I am going to template it out of the other first to make su
|
39
Drilling is complete.
|
40
Was missing more holes than I had previously thought.
|
41
|