1
Playfield was previously cleared.I wouldn't call it previously restored just previously cleared :-)
|
2
Shooter lane should sand up well.
|
3
Ball drops need a little work but they are not hammered like most you see these days.
|
4
|
5
There is some of the typical insert bordering around the yellow starburst to address.That is not a very fun project.
|
6
Merlin hole needs work but is solid overall.
|
7
Normal moat kickout wear to be repaired.
|
8
Castle lock hole needs some work but pretty decent compared to most I see these days.
|
9
Shooter lane sanded .
|
10
I am about to start the real process of sanding and repair.
|
11
Sanded and ready to begin repaints.
|
12
First will be the wood tones.
|
13
|
14
Next are the yellow starburst.These are tough and will likely need to be done once more on another session for coverage.
|
15
Cleared.
|
16
|
17
After a full cure I will do the remaining rework.
|
18
Sanded and being prepped for repaints.
|
19
Cleaned and ready to repaint.
|
20
Yellow starburst refinished for the final time.
|
21
Bordering at the center star is being taken care of.
|
22
The entire upper portion of the playfield and loop are being refinished.It is a transition of about 5 different colors to
|
23
Final woodtone repaints.
|
24
Some orange work at right target bank stars.
|
25
A little white work.
|
26
Ready to clear.
|
27
Cleared.
|
28
|
29
Switch cut outs/ball drops are looking good now.
|
30
Center playfield.
|
31
Yellow starburst right side.
|
32
Starburst left side.
|
33
Merlin hole,jet area and transition.
|
34
Upper loop.
|
35
Upper overall.That should be about it.I will see how it dries in and either sand and clear once more or sand and buff depen
|
36
Sanded for one more round of repaint and clear.
|
37
Final repaints completed.
|
38
Final clear applied.
|
39
Sanded and ready to polish.
|
40
Polished.
|