1 Repro AFM playfield.This is from the third run I believe.
2 ght be hard to capture this well in pics but there is a run/lump right in front and going into the Return to Battle inser
3 There are some other level issues I will also add the small black detail that is missing on the Jackpot insert picture.
4 Shooter lane is not defined quite well enough there is a puddling of clear in there that does not seem to be fully cured i
5 Shooter lane is redefined and all the clear is dug out of there.
6 The level of the insert pictured is suspect(a it low on one side) but will be taken care of in the process.Highlighted by
7 The run or puddling has been removed.
8 Playfield is now sanded level and is being prepped for the touch up and clear.
9 Playfield is prepped and ready for the repaint and clearcoat.
10
11 Black detail added to the Jackpot insert.
12 Unmaksed.
13 Cleared.
14 No lumps or runs.
15
16
17 Jackpot insert as cleared.
18 Wet in the pics but once it cures a week or two it will be ready to sand and polish.
19 Playfield has been sanded once more and will be cleared a final time.I was not fully satisfied with the insert edges and le
20 Ready for final clear.
21 Shooter lane smoothed out a bit more this time around as well.
22 Final clear is done.Sanding and polishing will be next.
23 Playfield is sanded and ready for final polish.
24 Polished.
25 Highlighting the light reflection that shows the previously wavy areas are now level.
26
27
28 Ready to go.