41 Others are cut through from the leveling process.These were previously raised or sunken in.
42 Hours later the black is sprayed.
43 Unmasked.
44
45 Close up of the switch cut outs as an example.
46 Ready for the second clear.
47 Second clear applied.
48
49 Insert area looks great.
50
51 Wood tones are n ice.Comparing this picture of the drop target cut out to the previous picture of it will help show the
52
53 After a few days cure I can decide if it is ready to sand and polish or would benefit from one more sanding and clear appl
54 Playfield has had several days to cure.
55 The clear has settled in around the repaints so now I can sand and apply the final clear.
56 Playfield sanded.
57 Finl clear applied.It is wet in the following pics.
58
59
60
61 Light reflections help show that all inserts are now level.
62
63
64 The layers of wood can still be seen.
65
66 After a couple days it will be ready to sand and polish.
67 A POA was also cleared .
68 Underside will now be sanded clean.
69 Sanded clean.
70 Topside sanded and ready for final polishing.
71 Polished.
72
73
74 I will t nut it next and it will be finished.
75 T nutted underside.
76 T nutted topside.
77 Done.