1
Playfield is ready to prep for the first clear application.
|
2
I will need to remove the Mylar.
|
3
There is already a little ghosting on the lost treasure insert.Should clear up during the process tough.
|
4
Drop bank is rough.
|
5
Playfield is cleaned and the Mylar is removed.
|
6
The mode start and lock hole need a little filler.Mostly just for cosmetic reasons.
|
7
Holes are shaped.
|
8
|
9
There is some ball swirl in the lower sling area on both sides that won't sand out so it will need to be refinished.
|
10
Same thing other side.
|
11
Shooter lane is sanded as clean as possible.
|
12
Playfield is ready for the first clear application.I won't start doing any of the repaints until the next phase so I can
|
13
First clear applied.
|
14
|
15
|
16
Shooter lane looks pretty good.
|
17
The mini will be prepped and cleared as well.
|
18
There is an extra hole that needs to be filled.It is most likely covered by the post/lane guide but just in case I am go
|
19
Hole is filled.
|
20
Mini is ready to clear.
|
21
I just touched a little brown over the repaired hole for the time being.First clear is applied to the mini.
|
22
Main playfield has cured overnight.I will let it set a couples days then sand it and begin the repainting/repair process.
|
23
Playfield is ready to sand and begin repaints.
|
24
Now that it is cleared I can better show the swirling in the yellow areas on the lower portion.
|
25
|
26
Switch cut outs are now sealed and will refinished.
|
27
|
28
I will likely need to repaint all the black borders.Most show some wear.
|
29
The clear should do a good job of filling the chipping at the target bank cut out.I avoid using filler in these areas.
|
30
Repairs to the holes are nice and solid now.The clear helps bond them.
|
31
Playfield is sanded and cleaned.
|
32
Wood tone areas are very lightly refinished.Only the areas that show filler were given a heavier application.
|
33
Wood tones unmasked.
|
34
The inner switch will need a little black work as well.
|
35
Target bank and drop hole areas look a lot better now.In the pictures it is hard to tell but the natural grain can stil
|
36
Upper switch cut outs are fresher now as well.
|
37
I will probably start on the yellow next.
|
38
Yellow is repainted as needed.
|
39
Lower sling areas no longer have the swirling.
|
40
|