1
Playfield(main) as it arrived.

2
Shooter lane looks nice.

3
It is a bit rough though.Should smooth out during the process.

4
Normal scratch from the apron.

5
Most of the inserts show bordering so they will all need to have the black borders repainted.

6
Ball drop damage at the switch cut out.

7
Better shot of the depression.I will not fill this area because it is not that bad and with the type of use it sees it ma

8
A bit heavier inset wear on the super slot insert.

9
This area is actually heavily trenched as can be seen coming off the rocket tip.

10
Insert damage most likely from Mylar removal.There is a portion of the art missing primarily a little of the bricks and

11
A little post removal damage between the two target holes.

12
Some bulb burn is present throughout the playfield in the natural wood areas.

13
Playfield is cleaned and ready to prep.

14
Shooter lane smoothed in and given a little nicer transition.

15
Insert damaged is also smoothed in prior to the initial clear so there will be less of an edge to fill prior to reworki

13
Playfield is ready for the first clear application.

14
First clear applied.
Shooter lanes are smooth now.

15

16

17

18
After this cures a couple days I will sand it down and begin the repair and repainting process.

19
Mini was also prep and has it's first clear applied.

20
Playfield has dried well enough for sanding and prep for repaints.

21
Stripped insert is fairly level prior to sanding.

22
Ball drop damage is now sealed.

23
Playfield is sanded.

24
Playfield is cleaned and ready to begin repaints.

25
The damaged insert will be taken care of.

26
The ground in dirt at the traffic wood tones will be fixed.

27
All the insert borders will be repainted.

28
The wear at the gumball exit will be fixed.

29
Inser border is applied to the damaged flasher insert.

30
It comes up a little short of actually covering the damage even with strategic placement.

31
This is a close up of what the are should look like.

32
A little creative handwork closes the gap and gets it looking respectable.Pictured side by side with a repro for exa

33
All wood tones are lightly done.Only heavy concentrations on the damaged and burnt areas.

34
Highlighting how transparent the tones are .

35

36
Better than bulb burn.Grain stills shows.

37
Wood tones unmasked..