1
Used IPB repro playfield.
|
2
Shooter lane is decent.
|
3
Some insert issues.
|
4
Sling is mounted too far forward and chipping the playfield on the right side.
|
5
Mosh pit hole is not properly beveled.
|
6
|
7
|
8
Red triangles have poor touch ups.
|
9
Touch up in the blue area.Purple was used.I will doctor it up a little bit but this should be covered anyway.
|
10
Registration issue on the phantom flip insert border.
|
11
Back to the mosh pit hole.This is hat it looks like now.
|
12
If you look at the upper edges of this original you can see what type of bevel it is supposed to have.
|
13
Bevel is made on the repro.
|
14
Blurring of the borders here and there into the wood tones need to be addressed.
|
15
There are some minor touches needed in the monsters of rock disc.If you look to the lower left of the R you can see the whi
|
16
Playfield sanded.
|
17
Cleaned and ready to start the repaints.
|
18
Target bank cut out has blurred borders as well.I keep finding stuff.What is this a 3rd?
|
19
Wood tone issues addressed as well as possible at this point.
|
20
Lagoon hole unmasked.
|
21
Target bank unmasked.
|
22
Red triangles refinished.
|
23
Red triangles unmasked.
|
24
Black work.
|
25
First clear.
|
26
CD reworked.
|
27
Registration reworked.
|
28
Triangles reworked.
|
29
|
30
|
31
Better shot of the bevel now cleared.
Will let this set a week or so then sand and final clear.
|
32
Playfield is sanded again.
|
33
Prepped and ready for the second and final clear application.
|
34
Final clear applied.
|
35
|
36
|
37
After it sets a bit I can final sand and polish it.
|
38
Playfield is sanded and ready for final polishing.
|
39
Final polish is done.
|
40
|