1
Kiss playfield as it arrived.
|
2
Pretty decent overall repro.There are some minor issues toio be addressed.The first is the black smudge in the outlane sw
|
3
There is a graining to it.
|
4
You can see the stacking of each color screened through the top coat.
|
5
One or two inserts show a little off registration.These will be doctored up a little to help disguise it.
|
6
|
7
The shooter lane is decent but does have a little cracking in the lower ply.Clear should fill that in or at least improve
|
8
This insert has a smudge of black extending into the yellow and orange it is also very sloppy and fat on one side.Not a lot
|
9
Better shot of the outlane switch cut out that needs a little work.
|
10
Playfield is sanded.Ready to b egin the repaints.
|
11
The square cut out for the sling arm needs some work as well because white has bled over into the areas that should be
|
12
The upper switch cut outs are lacking the wood tone.I will fix this as well.
|
13
Wood tone issues are addressed.
|
14
Doing a little rework on the smudged insert.
|
15
Wood tones and insert unmasked.Improvements were made.
|
16
Sling area corrections.
|
17
Upper switch cut outs fixed.
|
18
A small improvement made to the inserts where needed.
|
19
Ready to clear.
|
20
First clear applied.
|
21
|
22
|
23
|
24
Switch cut outs now cleare.Looks natural.After a few days cure I will know if it is fine to sand and polish or would bene
|
25
Playfield is cured and ready to sand and prep for final clear.
|
26
Some insert edging to address still.
|
27
Sanded .
|
28
Final clear applied.
|
29
|
30
|
31
After a few days I can final sand and polish.
|
32
Final sanding is done.Ready to polish.
|
33
Final polish is done.
|
34
|
35
|
36
|
37
Playfield is finished.
|
|
|
|