41
|
42
Mine hole is taking decent shape.Should be fine in terms of structure from this point but will require a good repaint of
|
43
Since it will need a complete repaint in the wood areas I have decided to finish out the repairs in the Baart cut out.Mos
|
44
Extra holes in this area will need to be filled.The larger through holes for post are correct the wood screw type holes sre
|
45
Repairs are made to the previously noted area.
|
46
After a couple hours of masking the wood tones are done.
|
47
Inlanes are looking good.I hated to sacrifice the natural grain but it had to be done.In all areas possible it is salvage
|
48
Shooter lane is done with a natural transition type of two tone.
|
49
Green is done on the mine hole.
|
50
Yellow is done at the jet area and upper portions of the loop..
white is done in another area that was needed.
|
51
The multi colored transitions are done down low at the right inlane and the complete upper half because of various wear,r
|
52
Upper tansitions.These are extremely difficult and time consuming.It requires about 9 colors to get the 3 color transition
|
53
Transitions unmasked.
|
54
|
55
|
56
Getting there.Have a few more minor repaints to do before I can clear this again.
|
57
More transition and white work.
|
58
Still have a couple more things to perfect but I will need to smooth those surfaces a little more by clearing and sanding
|
59
Ready for the second clear.
|
60
|
61
Second clear applied.
|
62
|
63
Starting to come around now.Much more repainting than I would like but completely necessary given all the issues in the na
|
64
Switch cut outs and ball drop damage repaired.Transition here was also reworked.
|
65
|
66
|
67
|
68
|
69
Drop target holes and ramp flap transition areas are much nicer.
|
70
|
71
The entire upper portion of the playfield has been reworked ,the wood,the red,yellow and colors in between.
|
72
In a day or two I will sand it down hit the minor details and apply the final clear
|
73
Prepping for the final repaints and clear.
|
74
Shooter lane is shaping up but continues to be a pain.I will do what I cab on this last pass.The biggest issue is that
|
75
This was the most problematic drop target hole.It is finally smooth enough to take a decent border.
|
76
Mine hole needs just a little more detail work.Not much but since I am in here anyway.
|
77
|
78
Final tweaks are made where possible.
|
79
Fianl clear applied.
|
80
|