1
Andromeda playfield basically as it arrived but cleaned up as well as possible prior to moving it into process.
|
2
The entire playfield is covered in ball swirl and vertical cracking.Any attempt to remove either results in a loss of paint
|
3
|
4
|
5
|
6
|
7
Some burn is also present.
|
8
ball swirl,cracking etc and slight breakthroughs to highlight the issues that pops up if it is sanded at all.
|
9
Many of the inserts are quite raised.The borders are gone etc.
|
10
Shooter lane is rough but solid.
|
11
Shooter lane sanded as clean as possible.
|
12
The playfield is prepped for the first clear.
|
13
Many of the borders were roughed in prior to the first clear application.
|
14
|
15
|
16
First clear is applied.
|
17
Shooter lane is improved.
|
18
|
19
|
20
Will let this cure for a bit then get it sanded as level as possible before starting the next round of repaints and clearc
|
21
Clear has settled in and I have sanded it.
|
22
Working on the wood tones first.I can't really do anything with the inserts yet because they are still too high on
|
23
|
24
Selectively refinishing some of the white areas.I can't do them all due to the minor details present but I am hitti
|
25
Second clear is applied.I am holding off on insert work and some other details until things level out a bit more.
|
26
|
27
|
28
|
29
It is starting to come around.
|
30
ready to sand again.
|
31
Still dealing with insert level issues so I just have to clear I again until I get it in a position where when I san
|
32
Cleared once again.
|
33
|
34
Leveling out now,
|
35
|
36
Dry ready to prep for repaints and insert border work.
|
37
I am hitting the highlights where I can.Mostly large areas with ball swirl in the most visible areas.
|
38
|
39
Border work is done in many spots.
|
40
|