42
Playfield is unmasked.With so much invested in the repainting of the wood tones I can't risk doing too much more to
|
43
One thing I want to rough in a little more is the switch cut out repair.
|
44
I am also going to finish mapping out the rocket kicker repair.
|
45
The blueprinting of the areas noted is done.
|
46
Everything that can be mapped out or roughed in at this point is.These repairs will improve on the next session but
|
47
|
48
The playfield is cleared once again.
|
50
The screw poke outs in the small lane have been repaired and nicely disguised without ruining the natural look of th
|
51
The trough entrance area repairs are now natural looking.
|
52
The various cracking is gone and thelarge damage to the switch cut out is now looking much smaller.More work is needed
|
53
The inserts are leveling out in this process.I anticipate/dred painting all black borders.That is more tedious than the w
|
54
Rocket kicker area is looking better.I will get into the other colors on the next pass and tighten up what has alrea
|
55
|
56
|
57
Will get back into this in a few days.Also need to work on the mini during the next session.
|
58
Sanded and ready to start a large amount of repaints.
|
59
Yellow work.
|
60
Light blue work.
|
61
Orange work.
|
62
More orange work.
|
63
The light purple.
|
64
Dark blue.
|
65
Green work.
|
66
Red work.
|
67
Now for the most time consuming part .Repainting all the black insert borders.Several hours have already been put int
|
68
Inserts are blacked out.All of them.
|
69
Ready to clear once more.
|
70
|
71
Cleared again.
|
72
Clear now dried and ready to evaluate for the final session of sanding,repainting and clear applications.
|
73
|
74
The bar code area needs a little detail work.It had a pop out from a screw in the lower portion and it also was pla
|
75
At this point the level is great so I can address the minor apron rub marks in the blue on this side.
|
76
The previously trashed switch cut out is looking much better there are a few minor touches still needed .It can't w
|
77
|
78
The insert border repaints have settled in so the edges are more apparent from the clear shrinkage.At this point when I s
|
79
|
80
|
81
A little work is needed at the power payoff insert.There is a small spot in the yellow border.
|
82
The ball drop damage from the divertor in front of the magnet hole needs a little more detail work.Tough area to get pe
|