81
Transition made.While it might not look perfect it will be more than adequate for the location.
|
82
All wood tones have to be repainted.That has been roughed in here.I miht need to do some minor repaints later but need to
|
83
If you expand this picture you will see that while all the wood tones are refinished they are done so in a way that still
|
84
Wood tones are unmasked.I will spray a darker thinner tone back over this after I clear it in later stages.This is just th
|
85
|
86
|
87
Drop target holes look better already.
|
88
|
89
The Bart cut out looks good.
|
90
Clear applied.This is the second coat and it is just sprayed in this pic.As it dries it will flow and flatten out .
|
91
There will be more sanding and reworks to be done.There are borders to be painted etc but it is starting to take shape.
|
92
|
93
The mine hole will need to have the black work done.The transitions can use a little work.The wood tone needs it's next col
|
94
Now that the playfield has been allowed to set for a while and soak in I can get back into it.When playfields need a lot of
|
95
Playfield is sanded.The next layer of wood tones is being done on the lower portion.This color is a little darker/browner t
|
96
Wood tone # 2 unmasked at the lower.The upper portion will be next.
|
97
Prepping for the final wood tone repaints.It is going to be more of a tan look than wood but it is going to be consistent a
|
98
Final wood tones are sprayed.
|
99
Border reworks and other details.
|
100
Mine hole is pretty much taken care of.Once cleard I will kow if it is truly finished or not but it looks promising.
|
101
Ready to clear.
It has been a bit of work to this point so that is something that has to be worked in here and there in
|
101
Cleared.
|
102
Upper issues are pretty much taken care of.
|
103
Drop target wear and insert ghosting have been well addressed.
|
104
Blown out switch cut outs and lower insert ghosting are gone.
|
105
The big divot and soft wood are fixed.The mine hole is all there.I will tighten up a couple minor things prior to the fin
|
106
After this cures just a couple of days I will cut it down very thin and flat put the final borders on catch anything t
|
107
Prepping for the final clear.
|
108
|
109
Final clear applied.
|
110
Now that the playfield is in order I will prep the new cabinet.The minor flaws in the wood are addressed first.
|
111
|
112
Primed head.
|
113
|
114
Lower primed.After setting overnight it will be guide coated then sanded.
|
115
Lower guide coated.
|
116
Lower sanded.
|
117
Lower refinished.
|
118
Head sanded.
|
119
Head refinished.
|