1
This TZ is a bit rough but not unusual these days.
|
2
|
3
|
4
Cabinet is faded but has been repainted to hide it.Decent attempt I would say.
|
5
|
6
Incorrect hardware used to secure the head to the lower.
|
7
Same thing other side.
|
8
Playfield overall.
|
9
|
10
|
11
Chipping at the second insert on the left.
|
12
Typical ball drop damage to the switch cut out.
|
13
There is some insert wear and possibly a bit of a milkiness.That may or may not be eliminated entirely in the process but i
|
14
Shooter lane is a little bit rough but should sand up nicely and not require any type of repaint.
|
15
The signs of the mini playfield are screwed on instead of riveted and they are decals over plastic not correct.
|
16
Other plastics like the slot plastic are also decals over clear plastic and incorrect.
|
17
|
18
Clock decal is letting go.
|
19
Ramp flaps help reflected the overall condition of the game.Rusty and worn.
|
20
Inside is on par with the rest of the game.Not terrible but closer to bad than good.
|
21
Close up of the level of rust and corrosion present.
|
22
Cabinet has seen some moisture so it is cracking and weak.
|
23
|
24
Inside was painted with a brush or roller.
|
25
Poor power conversion was done on the transformer.
|
26
|
27
Corrosion is present on all playfield parts.Highlighted by the mounting brackets on the opto board.
|
28
Resting brackets are rough but solid.
|
29
|
30
|
31
Boards are a mixed bag.On a game like this having all servicing all is worth the effort.
|
32
Head gutted.
|
33
|
34
|
35
Underside teardown nearly complete.
|
36
Topside teardown in process.
|
37
Topside stripped complete.
|
38
Underside stripped complete.
|
39
|
40
Getting the playfield going first.Setting it up to drill the third magnet hole.
|