1
Supplied base game.
|
2
|
3
|
4
|
5
Normal leg wrinkling.
|
6
Playfield shuld restore very nicely.
|
7
Left return ramp tabs is still intact.
|
8
Right return ramp tab is still there as well.
Ball drops are pretty decent as well.
|
9
Shooter lane is solid and will sand up well.
|
10
Mid playfield is good.
|
11
Drop target cut outs have only minor wear.Not bad at all compared to most CCs still out there.
|
12
|
13
Mine hole is okay will need a little work.
|
14
Upper looks good.
|
15
Inside is typical.Dirty,disorganized/sloppy.
|
16
|
17
|
18
Underside is okay.No hacks or major problems.
|
19
Normal corrosion on the resting brackets.
|
20
Lamp panel in the back is clean but they are using tape to hold the channels on.Most likely it just has the wrong channels
|
21
Boards are all original and look good.No obvious problems.
|
22
Teardown begins.My top priority os gettingthe playfield going.CC playfields are not easy .
|
23
Underside teardown in process.
|
24
|
25
Topside teardown in process.
|
26
|
27
Underside stripped bare.
|
28
Topside stripped bare.
|
29
Playfield is cleaned and the Mylar sections are removed.
|
30
Shooter lane should sand out nicely.
|
31
Some typical issues up top.Mine hole,ball eject at the jet bumpers.Nothing major nor anything I haven't dealt with before.
|
32
Ready to begin the playfield restoration process.
|
33
Shooter lane will be sanded.
|
34
Ball drops will need some work as well as a lot of little things from the many wire guides that have to be removed and then
|
35
|
36
Drop target holes need a little work.Not a lot .
|
37
|
38
Mine hole prior to rework.
|
39
Playfield is sanded.
|
40
Shooter lane sanded.
|