41
|
42
|
43
|
43a
Rough is not quite strong enough to describe them.Unfortunately of all games to find this issue NGG in particular has som
|
44
|
45
|
46
|
47
Even the wheel will need to be done.
|
48
In this picture I am starting the process of reconditioning the metal.I start with bead blasting it.
|
49
An example of a large coil bracket that is now blasted and free of corrosion and rust.
|
50
After several hours the parts are now starting to turn the corner.
|
51
|
52
the next step will be to have these parts plated.When metal is as bad off as this was you have to seriously prep it pri
|
53
Playfield is stripped of the t nuts.
|
54
The large yellow insert has been leveled.
|
55
The large orange insert is badly raised.
|
56
Large orange insert is leveled.
|
57
Playfield is ready to prep for repaints and clear.
|
58
I will refinish the yellow area that has the discoloration and touch up the red chip..
|
59
I am also going to refinish the insert bordering in the black in the areas pictured.
|
60
Sanded.
|
61
Shooter lane is rworked.A bit smoother now.
|
62
Yellow refinished.
|
63
Black areas of concern refinished.
|
64
Ready to clear.
|
65
First clear applied.
|
66
|
67
As can be seen in the light reflection the large insert is extremely close to perfectly level now.Theis application of cl
|
68
|
69
Repaint looks great.
|
70
While this cures I will get back to the corrosion problems.
|
71
The flippers will be rebuilt.I have polished up a new set of plates because the others are too corroded to bother with whe
|
72
This is all the trash that come off the flipper assemblies.
|
73
Close up of the old plates and hardware.
|
74
Flippers are rebuilt now.
|
75
Trough has been polished ad rebuilt with new hardware.
|
76
|
77
Jet bumper assemblies and kickout out coil have been polished and rebuilt.Each part takes quite a while becaue they hav
|
78
Moving onto the gopher assemblies.These are tough.Since the brackets are stainless with a lot of moving parts I chose not
|
79
|