1
Medieval Madness base game.This one is a bit below average and rough but it was also priced that way so it will be fine
|
2
|
3
|
4
Playfield is well worn and has some screws popping up through it here and there.
|
5
|
6
|
7
Broken plastics,rough ramps etc.
|
8
|
9
Inside is very dirty.
|
10
Rusty and light corrosion.No real concerns though.
|
11
|
12
|
13
|
14
|
15
|
16
Teardown is ready to begin.
|
17
Head is gutted.
|
18
|
19
Wiring removed.
|
20
I have a nice spare MM cabinet so at the same time I am working on teardown I am also able to get moving on the cabinet
|
21
|
22
Cabinet is stripped and ready for repair.
|
23
Back to the actual game the playfield is stripped.
|
24
|
25
Cabinet is emptied less the speaker.It will just replace my spare cabinet.
|
26
All the coil assemblies are broke down for tumbling,polishing and rebuild.
|
27
Coil brackets are polished and ready to rebuild.
|
28
Coils rebuilt.
|
29
Better shot of the finished product.
|
30
I have two coils not yet shown they are the Merlin eject and the Moat popper both are being upgraded to stainless steel ver
|
31
Moving onto the repro plafield.It is dusty from sitting around.I have had it a while and waited purposely to do anything w
|
32
This is an example of what I was talking about.It give a grainy look as it soaks into the wood during the cure process.
|
33
I can now sand this out and start my own refinishing process.
|
34
Playfeild is sanded.
|
35
Playfield is cleaned and ready to start tweaking.
|
36
First off I will fix the border error on the left side of the super jets arrow.It is missing the purple there.It is not
|
37
there is also an out of place dimple beside the right switch cut out.I will put a touch on this but it will be mostly co
|
38
Corrections are being made.
|
39
Cleared.Highlighting the lower.
|
40
|