1
Typical WH2O base game.It has some flaws but it also has some things that are a little above average.
|
2
|
3
|
4
|
5
|
6
|
7
Playfield is a good candidate for restoration and will not need to be replaced.
|
8
|
9
|
10
Translite is solid but dirty.
|
11
Translite cleaned and rebuilt.
|
12
Translite is ready to go back into a restored game so it will be safely stored while the game goes through the process.
|
13
Topper has been removed but is present.
|
14
DMD panel will be cleaned and rebuilt next.I try to tackle some of these parts as I remove them.
|
15
Dmd panel is torndown.The black parts will be refinished,the plastic will be washed and buffed,the metal will be polished.
|
16
A new display will be installed.The old one shows some burn in.
|
17
Panel is rebuilt.
|
18
Ready to shelve for the time being.
|
19
Head will be gutted next.
|
20
Boards are removed.
|
21
Boards are cleaned and evaluated.All will be serviced.
|
22
Some jumpering on the driver(will be removed during service).
|
23
Some heat damage to the DMD controller.That is the norm the board will be rebuilt.
|
24
Lamp panel will be torn down and refinished next.
|
25
Metal will be cleaned and polished.
|
26
Lamp panel refinished.
|
27
Lamp panel rebuilt.New labels and bulbs installed.
|
28
Head is now gutted.
|
29
Moving onto the playfield teardown starting up top.
|
30
|
31
Mini removed.
|
32
Mini stripped complete.
|
33
|
34
Main playfield stripped complete.
|
35
|
36
Playfield is cleaned and will be ready to start the restoration process on shortly.v
|
37
Cabinet is ready for complete teardown.
|
38
Lower gutted.
|
39
Head gutted.
|
40
Head is ready to begin the stripping and repair process.
|