41
Flipper rebuilt.
|
42
|
43
Moving to the next group of coils.
|
44
Torndown.
|
45
Metal polished
|
46
Rebuilt.These coils are not being replaced.They won't look perfect cosmetically but they are fine otherwise and they have
|
47
Another group of coils to rebuild.This game has a lot.
|
48
Metal polished.
|
49
Rebuilt.The slot kick out has a new bracket and coil.
|
50
Next group.
|
51
Rebuilt the pops and the outhole kicker.It needs a new link because someone made one out of a PCB but I will swap that at
|
52
Underside is almost stripped complete.
|
53
Topside nearly stripped complete.
|
54
Playfield is out of the game and the underside is completely stripped.
|
55
Topside stripped complete.
|
56
Apron is sanded and ready to refinish.
|
57
Apron is based in black.
|
58
Apron is cleared in gloss for the first application.After it cures I will sand and final finish it in the correct matte cl
|
59
Playfield is in the refinishing shop and ready to begin prep.
|
60
Playfield is cleaned.
|
61
Shooter lane will be sanded and shaped up as well as possible.
|
62
Shooter lane is sanded clean.
|
63
The 3rd magnet hole will be made next.
|
64
Hole is drilled.
|
65
Playfield is sanded and being prepped for some initial repaints prior to the first clear application.
|
66
Ready for repaints.
|
67
|
68
Wood tone is sprayed at the new magnet hole.It is done in the correct offset pattern in order to match the other two holes.
|
69
|
70
Border is applied.
|
71
Playfield is ready for the first clear.I will get more into the repairs and repaints on the next round but for now the go
|
72
First clear applied.
|
73
Playfield has cured overnight in these pics.Shooter lane looks good.
|
74
I will repair the ball drop area during the next phase.The first application was to help glue and seal the splintering w
|
75
3rd magnet area looks good.Things like the ball eject divot will also be addresses during the next phase.
|
76
After this sets another couple days I will sand it then start the repairs and repaints.
|
77
Gumball rebuild and mods are next.
|
78
Torndown.
|
79
Parts are cleaned and polished.
|
80
Gumball machine is rebuilt.I will add more gumballs later.
|