81
The lower plays of wood that make for the ramp entrances are being shaded a bit darker for a more authentic look.They will
|
82
The lavender color is refinished where it was showing wear.This area is also covered once installed.
|
83
The upper loop and lock exit needed to be refinished because of a ball trail and light wear.
|
84
Now I will address all the insert borders this is by far one of my least favorite and most time consuming obsessions.Light i
|
85
All inserts are masked and refinished.
|
86
The light no longer shows through.
|
87
Inserts are unmasked.
|
88
Second clear is now applied.
|
89
Inserts look much better now.
|
90
Wood tones and switch cut outs are much improved.
|
91
|
92
Gumball exit now cleared.
|
93
Other previously burnt and discolored natural wood areas now cleared.
|
94
Loop repairs now cleared.
|
95
Upper area general picture.
After a couple days of cure time I will sand,level and spray the final coat of clear.
|
96
Cabinet is repaired and prepped ready to prime.
|
97
|
98
Cabinet and head are primed.
|
99
|
100
Head is guide coated.
|
101
Lower guide coated will be ready to sand and paint after an overnight cure.
|
102
Playfield is sanded and I am prepping it for the final clear.This will be a nice thin coat to finish off the level.
|
103
Playfield is cleaned and ready for final clear.
|
104
Final clear applied.
|
105
|
106
|
107
|
108
|
109
|
110
|
111
Playfield is finished as far as the clearing process goes.Once it cures a few days it will be ready for final sanding and
|
112
Playfield is cured and I will now sand the underside clean.
|
113
Underside sanded clean.
|
114
Playfield sanded and ready to polish.
|
115
Playfield is polished.
|
116
|
117
|
118
Ready for rebuild.
|
119
Cabinet is ready to sand.
|
120
|