165
Rebuilt assemblies are being placed as needed.The hanger brackets have been replated.
|
166
New post are installed.
|
167
New lane guides as well.
|
168
Top is about as far as it goes without wiring.
|
169
Underside rebuild begins.
|
170
Switch harness is roughed in place and will be rebuilt next.
|
171
Red targets will be replaced with a better matched orange.
|
172
The generic yellow daisy chains will be eliminated in favor of the factory correct color wires.This is time consuming but
|
173
Targets wired in.I will neaten the wiring towards the end of the process.
|
174
All targets replaced.
|
175
|
176
All other brackets were polished.
|
177
Switch harness rebuilt and in place.
|
178
Lamp harness roughed in.
|
179
Solenoid harness roughed in.
|
180
Underside rebuild is complete.
|
181
|
182
Edges were beveled and side were covered in felt to help eliminate the possibility of scratching the inside art.
|
183
Same thing other side.
|
184
Playfield is ready to go back in the cabinet.
|
185
Cabinet rebuild is closing out,.I let them set as long as possible prior to rebuild.
Head is on lower.
|
186
Serviced boards.
|
187
Head is rebuilt and ready to wire.
|
188
New coin door installed.
|
189
Two tone flipper buttons as made up and installed as requested.
|
190
Black nickel plated gun will be further reworked.
|
191
The grip will be done in gold to help tie it to the other trim.
|
192
Gun is two toned.
|
193
Apron has been based and auto cleared.It will now be decaled.
|
194
New decals installed.
|
195
Apron is being rebuilt with a newly plated ball fence and screws.
|
196
Apron is rebuilt.
|
197
Power box and receptacle will be swapped out for newly plated versions and rebuilt with a new varistor.
|
198
Power box rebuild complete.
|
199
Power box now installed.It is straight this time.Also of note is that the new leg plated were polished and the prop rod wa
|
200
|
201
|
202
Head is wired neatly as well.
|
203
Refinished and rebuilt lamp panel and speaker panels are in place.
|
204
Playfield is in the cabinet.
|