1
1978 Bally Playboy as it arrived.
|
2
Head is bit rough but can be repaired and reused.
|
3
Will need repair.I will most likely change the framing out.
|
4
Lamp panel is trashed.
|
5
Water damage,delamination,screwed together.
|
6
Lower is also showing signs of moisture and will likely be replaced.No point in trying to salvage junk .When the bottoms a
|
7
|
8
|
9
Paint is blistering from moisture exposure.
|
10
Lower is being held together in the rear with brackets.Another strike against reusing this lower cabinet.
|
11
|
12
|
13
|
14
Will get more in depth shortly.
|
15
Replacement playfield will be reworked prior to being installed.
|
16
Shows some graining.
|
17
Some inserts are slightly raised.
|
18
I will repaint the black area around the insert roll over to improve the registration.
|
19
|
20
More indicators of insert raising.
|
21
|
22
|
23
Playfield is prepped and sanded.
|
24
Corrections are made.
|
25
Playfield is cleared.
|
26
|
27
|
28
|
29
Apron is removed and will be reworked.
|
30
Apron is stripped based in black and now decaled.It will be sanded and cleared a few times to make it more seamless.
|
31
First clear applied to apron.
|
32
Apron was sanded and cleared again.
|
33
Shooter lane cover done as well.
|
34
Playfield is pulled from the cabinet and will be addressed later.
|
35
I am ready to teardown the cabinet.Some things will be restored as they are removed others will be restored later in the pr
|
36
A new lamp panel will be made during the teardown of this one I will rebuild all the connectors.
|
37
Old display connectors removed.
|
38
All display connectors rebuilt.
|
39
A new set of connectors will be installed and the existing ones rebuilt as well between the lamp panel and backbox.This will
|
40
Old connector.
|