1 Sample Earthshaker.
2
3 Cabinet is rough.Head is screwed together.
4
5
6
7
8
9 Rust corrosion,spilled drinks etc on the interior.
10
11
12 Playfield is very rough.Raised inserts,mylar.
13
14 Inside is like the rest.Dirty,corroded.
15 Rusty transformer.Corroded prop rod.
16
17
18
19
20
21 Ready to teardown.Will restore as I go since I already have parts in order in terms of cabinet and playfield.
22 Lamp panel first.
23 Torndown.
24 Panel refinished in white,new foam on the set off block.Wiring cleaned,connectors rebuilt.
25 Metal polished.
26 Panel done.
27 Tearing the topside of the playfield down now.
28 Will go through the removed parts before proceeding.
29 Ramps and plastics will need to be replaced.
30
31 First ramp built.
32
33 Second ramp built.Will focus the attention on parts already done right now then pick the rest back up.
34 NOS playfield.Sounds good but it is a System 11 so it is just as much if not more work than your average touch up and c
35 Lightly cleared.What normally happens on these playfields is that the inserts bubble and develop ghosting speckles and
36 The surface condition now cleared shows how cracked etc the playfield is.
37
38
39 First clear is dry and now sanded.It has not been long enough to judge the insert stability yet but I will start working
40 There are some minor storage scratches and nicks to address.