41 Boards all need some help but it does function.
42 Corrosion at the battery holder.
43 Burnt GI section on the driver.
44
45 Boards are out and will be serviced.
46 Speaker panel will be done now.
47 Torn down.A new lens will be installed along with upgraded speakers and refinishing the existing panel.It uses a unique go
48 The speaker plate on the right will be replaced to accommodate the new speaker set.
49 Refinished etc.
50 Rebuilt with the upgraded speakers and new parts needed.
51 Will work the board panel now.Just needs to be reconditioned and freshened up.
52 Board panel done.
53 Has the wrong bubble level.
54 Was able to get back to the original apron art.Really nothing wrong with it other than the typical corrosion and discolora
55 Tearing the underside down.
56
57 Will rebuild all the coils now.This means polishing,resleeving,labeling and more.Very time consuming and tedious.s
58 Before example.
59 After example.
60
61 this lot is next.
62 Jet bumper mechs are mostly broken.
63 Flipper set up were rough.
64 Flippers rebuilt with new coils.The others were wrong and or beat.
65 Coil assemblies are all done.
66 Teardown continues.
67
68
69
70
71
72
73
74 Plate and sheet in the floor were clearly crooked from the factory.
75 Gutted lower.
76 Head gutted as well.
77
78 Head is rough there is a tape like substance that is keeping the ply from adhering properly in this area.Tough to beat n
79 Lower is being stripped.
80 Inside will be repaired and I will get as much of the grain and cracking out as possible.