199
|
200
Working on the flipper mechs now.They are torn down and the parts are hand polished.
|
201
Other various parts and pieces are also being polished.
|
202
Flipper plates are perfectly centered in the through hole and they will be rebuilt and wired directly on the playfield
|
203
|
204
New stand up targets are installed.I could more easily use the old mounting system but the brackets are rusty and the pr
|
205
Spinners are stripped and prepped for a gloss white epoxy coating.
|
206
Spinners are expoxy coated ,bakes and now cured overnight.
|
207
Prepped for the decal application.
|
208
Only the art portion of the spinner decal is used.
|
209
Spinners are ready.I am torn on whether to clear them or not.On one hand if I do clear them it will seal the decal in
|
210
Wiring harness has been cleaned and is now placed in order to be soldered in.A lot of the extra work involved in cleanin
|
211
The up[per portion is starting to take shape.The mechs were cleaned,polished and rebuilt.Some of the coils are being rep
|
212
The new lamp sockets are being soldered in.In locations like this where a short to a surrounding bracket is possible I
|
213
Any switches not replaced are cleaned then the contacts are lightly sanded with a very,very fine sandpaper in order to
|
214
|
215
All switches that use them will get new caps.Pictured is a jet bumper switch with an old cap in place.
|
216
New cap is now in place.
|
217
The replacement targets are being rebuilt with the correct style diodes and the caps are also being added.New daisy chains
|
218
Example of the proper diode and cap configuration.
|
219
Still have another day or so of soldering ahead but it is getting close.Once this is finished the top will require jus
|
221
Reworking the drop target assembly to eliminate potential shorts and make it easier to service.
|
222
All switches rewired with protections in place.
|
223
Plug installed for the switches.
|
224
Target bank built and installed.
|
225
Wiring is coming together.
|
226
|
227
|
228
Flippers rebuilt with all new coils etc.Caps are in place to eliminate arching and random firing of other solenoids.
|
229
New targets are wired correct caps in place.
|
230
Wiring is complete.
|
231
|
232
|
233
|
234
Connectors are being rebuilt.
|
235
Connector rebuild example.
|
236
Playfield is in the cabinet.
|
237
|
238
|
239
|