41
Matte clear now dry and at the proper gloss level.
|
42
|
43
|
44
Black area helps highlight the gloss level.It has a sheen but is not glossy looking.
|
45
|
46
Highlight of the gloss level on the other colors.
|
47
Lower is beig gutted in prep for the new cabinet.
|
48
Coin door parts are back from plating.
|
49
|
50
Hard to describe how massive a Bally coin door is once torn down but it looks even worse since this is two of them.
|
51
|
52
Old lower gutted.
|
53
New cabinet ready to rebuild.
|
54
New legs were chrome plated.
|
55
Braided with updated leg plates installed.
|
56
New chrome legs installed along with new rails and flipper buttons.
|
57
|
58
|
59
Head is now on lower.
|
60
|
61
Coin door build up is wrapping up.It is quite an undertaking when making an all new harness as well.
|
63
Coin door in place.
|
64
Lamp panel refinished.
|
65
Lamp panel rebuilt with new displays,polished parts etc.
|
66
Boards have been serviced.The solenoid driver was returned as non serviceable due to copper/corrosion in the traces makin
|
67
I have a nice spare solenoid driver that was previously serviced that I will put in place for the time being.Replacement
|
68
The rectifier board will need to be replaced.A little bit of a chore since all the wired from the transformer must solder
|
69
New rectifier boar installed.
|
70
Cabinet wiring is now in place.New switches,cord,line filter etc were all installed during the process as well as various
|
71
|
72
|
73
|
74
Powered up for testing.
|
75
All functions check out so I can close out the cabinet and move onto the playfield.With all the painting,plating,fitting an
|
76
The supplied NOS playfield was previously cleared by another well know playfield expert.
It is not fit as is to go into
|
77
Primary concern is that the playfield is a bit too thick an lumpy looking.I feel likethe clear itself is fine and the adhe
|
78
When looking at some of the inserts you can see what is basically a puddle of clear around them.The 9 and 10 show this we
|
79
More puddling around the inserts.The 2X being the highlight.
|
80
|
81
Using the light reflection as a tool the lumpy nature of the clear is more obvious.We are looking for flatter thinner st
|