1
Voltan base game as it arrived.
|
2
Faded on this side.
|
3
There is a glue like residue on the cabinet in the areas that are not faded.I think it has some type of stickers or decal
|
4
|
5
Coin door and trim are rough.I have it up on new legs.
|
6
This side is not so faded but has the glue residue all over it.
|
7
|
8
Rear is decent and solid.That is rare on these older Bally's they typically are swollen.
|
9
Glass looks good.
|
10
Playfield has swirl and some wear but is workable.Will get more into that once the glass is removed.
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
Will pull the glass now.
|
19
|
20
A new channel is needed due to the rust issues on the current one.
|
21
There is some glue residue on the outside.Should clean up without issue.
|
22
New channels and trim for the backglass.
|
23
The channel is stuck on and will have to be carefully forced off.
|
24
New channel is in place.
|
25
Glass is cleaned and ready to put up for now.
|
26
Ready to look inside the backbox now.
|
27
|
28
|
29
Most if not all connectors are burnt on the transformer rectifier board.That board as well as the connectors will be replac
|
30
Missing the guard for the transformer but that should not be hard to come up with.
|
31
|
32
|
33
All connectors are now being rebuilt.This is a very time consuming but necessary job.
|
34
|
35
|
36
I will save all tags along the way.
|
37
|
38
A junction will be added to this area to make splitting the harnesses from the lamp panel and backbox possible.This addit
|
39
New junction is in place.
|
40
All connectors are now rebuilt.
|