1
Setting the Vector up.I always like to show the bottom of the cabinet first on these older SS Ballys because they almos
|
2
|
3
The main issue is the rear panel and the floor.This rear panel is made of particle board and they are usually falling
|
4
Game is set up and ready to start he process.It is pretty nice overall for the age.
|
5
|
6
|
7
|
8
|
9
|
10
Glass removed.I am getting into teardown.It takes a little more time on the games like this where I have not documented
|
11
For the age this game is in nice shape in general.
|
12
|
13
Has the wrong flipper bats.
|
14
Shooter lane has good potential.
|
15
|
16
There are some swirls divots that have been previously touched up.
|
17
|
18
|
19
Some wear at a few inserts.
|
20
This is probably one of the bigger challenges that lie ahead.That being the wear into the lettering.It has been masked
|
21
|
22
Everything else looks to be in order up top.Will know more once I strip the playfields.
|
23
Inside is pretty decent as well.
|
24
Metal condition is nice for an original but can be further improved with polishing and or plating.
|
25
|
26
There is a red overspray that is a little lower than the black.Not sure if the cabinets start out red then are stenci
|
27
|
27a
Coin door is nice compared to most that come through here.It can be further enhanced if desired but as is it is not bad.
|
27b
|
28
|
29
Transformer and rectifier board assembly look average.No doubt the rectifier board will need servicing.
|
30
Playfield underside is nice.Fairly complex game.Kind of the worst of everything from a build perspective. Solid State
|
31
|
32
|
33
|
34
The backglass looks great.
|
35
|
36
Lamp panel is nice also.
|
37
|
38
Wiring and boards all look good at a glance.The MPU is a replacement and the others will need servicing .
|