1 Starting platform is pretty rough.This is a sample game.
2
3 Some pretty ugly damage to the cabinet.It is solid though and not all the way through.
4 VERY dirty.
5 Lots of insert ghosting.Probably one of the worst I have seen in terms of almost every insert having at least a little.
6 Wear atthe volts roll over.
7 More ghosting.
8 Filthy inside lots of "repairs" using tape and incorrect parts.
9 Most of the metal is oxidized.
10
11 Filth,incorrect parts etc. The norm these days :-)
12 Teardown underway.
13
14
15 Head is gutted.
16 Underside parts removal.
17
18
19 Underside stripped.
20 Topside teardown in process.
21
22
23 Playfield is out of the cabinet.
24
25 All parts removed.
26 Cleaned now I can evaluate the true condition.
27 Most of the inserts are rough lots of little stuff here and there mostly ghosting.
28 Screw was drove up through the playfield in front of lock insert target.
29 Lower inserts are not as bad as the upper but still rougher than normal.
30 This insert is badly raised.
31 Heated up and reset.Should be fine now.
32
33 Shooter lane needs some work.Hope to sand it all up without repaint or trenching.
34 Shooter lane sanded up nicely. That is about it for the playfield until I am ready to put the initial clear on and begin th
35 Cabinet is ready for final teardown.
36 Head is off as well as the siderails.
37
38
39 The break in it seems to be in just the first couple of layers.
40 I dug all the loose wood out and trenched around it to give the repair material(carbon fiber filler) a good area to anchor i