40
Repairs in process.
|
41
Now that all the worst areas have been repaired a skim coat is applied to make the entire surface nice and straight and el
|
42
Not a lot gets left behind.
|
43
|
44
|
45
|
46
|
47
|
48
|
49
|
50
Any gaps are filled to make more of a uniform look.
|
51
|
52
All the structural repairs are finished as well as all the finish repairs.The last thing will be to smooth up the front li
|
53
|
54
Ready to prime.
|
55
Primed.
|
56
|
57
Minor imperfections are addressed.Once it dries overnight it will be sanded and primed again then it is ready for paint.
|
58
Sanded and ready for a final priming.
|
59
Re-primed.
|
60
While the head dries I will start on the lower cabinet.The decal attempt was removed,the front seperation has been taken ca
|
61
The bottom has been sanded clean.It will have to be done again after the entire process of refinishing it is done but for no
|
62
Will begin stripping the cabinet to bare wood all the way around.
|
63
Stripping in process.
|
64
Back down to bare wood.
|
65
|
66
The issues on the back will be addressed.At this point the plys have been reglued.
|
67
|
68
This is the rougher side.Anytime I had a little extra filler when I was doing the head I wiped the worst areas..
|
69
This does a good job of showing how badly gouged up it is.
|
70
A guide coat is applied to help me level it as much as possible prior to filling.
|
71
The corners are repaired with the carbon fiber filler for strength.Little will be left behind but considering the previous
|
72
The entire side will have to be skimmed a few times to ensure every little nick and gouge is taken care of.
|
73
That got most of it but it will need to be done one more time.
|
74
Hopefully the last skim coat on this side.
|
75
This side is straight and solid now.
|
76
A little bit of finish work left like redoing the interior and fixing all the little stuff.
|
77
All the nail holes from assembly will be filled.
|
78
|
79
Nail holes filled.
|