80
Final repairs in process.
|
81
|
82
Lower cabinet is ready to prime.
|
83
|
84
|
85
Cabinet is primed and guide coated.
|
86
After a thorough sanding and reprime to eliminate grain the chocks will be installed prior to refinishing.
|
87
|
88
|
89
Rebuilt corners are nice and sharp now.
|
90
While the cabinet sets up we will start the playfield restore process.
|
91
The shooter lane need attention.I think this one will sand up nice with some effort.
|
92
Now that the Mylar sections are removed the old touch ups have been wiped off.Not terrible flipper drag but there are 4 c
|
93
The snack bar hole is rougher than normal because it was missing the rear deflector which allowed the ball to eat the back
|
94
Everything is cleaned and sanded as clean as it will ever get.The shooter lane and window cut out turned out very nice no n
|
95
Shooter lane.
|
96
Repaint of flipper drag in process starting with the black.Since it is black I do not have to do the entire area just clean
|
97
Black applied.
|
98
I will catch all the smaller details like the yellow lines after the the intial clear.Right now I am just hitting the high
|
99
the green is another area that I need to lock in prior to the initial clear so that has been taken care of.
|
100
That is about it for the intital touch ups in this area.It is not done yet so the minor things that are not 100% yet will
|
101
The wood tones in the ball drop area will not sand up totally clean so they will need a little freshening up.
|
102
I use a very thinned out tone so the grain can show through.I am doing other things right around it so it will be uniform.
|
103
Both sides are done.This shows just how see through the wood tone is since you can still see the art underneath the oversp
|
104
Refinished.
|
105
The holes have been repaired withthe carbon fiber filler.This is a very solid repair that is anchored with dowels that hav
|
106
The wood tones are painted around the repairs so the will be locked in once the first coat of clear is applied.
|
107
|
108
Intital clear applied. Ball drops and sling area.
|
109
Snack bar hole repair roughed in.The final repaints will be done prior to the last coat of clear being applied.Doing i
|
110
Shooter lane looks much better with it's first coat of clear.Will continue to improve as it is sanded and cleared again.
|
111
The lower cabinet has been sanded and trimmed out in the base color.
|
112
|
113
Corners look good.Nice and sharp again.
|
114
New chocks installed.After the trim out dries the cabinet will be lightly sanded and refinished once more.
|
115
Head is ready to refinish.
|
116
Head refinished with the first coat.Will be lightly sanded and refinished again with a slightly glossier paint.
|
117
Back of the head/replacement panel.Once it gets it's final finish applied it will then be rescreened as original with the
|
118
Final finish is on the cabinet now.It will be detail sanded and ground braided next.
|
119
Back to the playfield.It has been about a week since I cleared it so it is ready to sand and begin final touchups to.
|