41
Lower is reworked and seams have been addressed.It too is ready for the first primer application.It will require two ultima
|
42
Lower is primed.
|
43
Head is primed and guide coated.
|
44
Lower guide coated.Once this cures I will sand it down and then prime it once more.Painted cabinets require much more work
|
45
Cabinet is now sanded and being prepped for a final prime.
|
46
|
47
Primed for the second time.
|
48
the seams continue to fill in.
|
49
Lightly puttied in the more stubborn spots and guide coated.After a week of cure it should be ready for the final sand an
|
50
The finish sanding is done to the cabinet I will begin th repainting process in the morning.
|
51
|
52
Black base is sprayed.
|
53
Red stencil is done on the head.
|
54
Red stencil done on lower.
Silver is next.
|
55
Silver stencil is applied.
|
56
Silver is sprayed.
|
57
Unmasked and just about ready to clear .
|
58
Ready to clear for the first time.The first application will be regular gloss clear to seal it up.I will get into the corr
|
59
Head cleared.
|
60
Lower cleared for the first time.
|
61
|
62
Clear has dried overnight.After a couple days I will sand i down and start working on the final corrections to the tighte
|
63
Playfield is cured.It has been sanded and is ready to polish.
|
64
|
65
|
66
|
67
Polished and ready for rebuild.
|
68
Cabinet is sanded again.
|
69
Cabinet is cleaned and prepped for the final stencil corrections.
|
70
Corrections to the silver are made.This is happening on all sides but only one is shown for example.
|
71
Red corrections are being made.
|
72
Cabinet is ready for the final clear.This clear will be less glossy than the previous.
|
73
Final clear applied lower.The gloss will die down as it cures.
|
74
Final cllear applied to the head.
|
75
Cured and the gloss has come down to a more appriate level for this application.
|
76
Final clear gloss level on the lower.
Cabinet will now be ready for rebuild/assembly.
|
77
Cabinet is now in the rebuild area.I rebuild these types of games outside of my reg shop because they are very time cons
|
78
New stainless steel is in stalled in the head.
|
79
All boards have been rebuilt/serviced.
|
80
A correct Bally solenoid driver was located and rebuilt.
|